1. Home
  2. Current
  3. Parts
  4. LED power supply
LED power supply for HOG, DROP and SURF models
LED power supply for HOG, DROP and SURF models

LED power supply

Your Price: $19.99
model: Parts-LED-Power-Supply
note: 1230

Choose Options

*


Replacement LED driver power supply for any of the Santa Monica scrubbers. These power supplies can also be used to build DIY your own scrubber, using three-watt LEDs HERE and cases HERE and HERE. 6 month warranty.

These power supplies are similar to a laptop power supply, where the AC power cord unplugs, and you can plug in a different one for a different country. So they operate on 240 and 120 volts without further changes, and have the little figure-8 plug which your computer laptop cable can plug right into. Has UL, Canadian UL, and CE safety rating, and gives 600ma for long LED life. Choose the number of three-watt LEDs you need to power:

1 or 2 of the three-watt LEDs in series:  

DROP.2
DROP.6
DROP.6x
DROP1.4x in low power mode (2 LEDs on the back wall).
HOG.5
HOG1
HOG1.3


3, 4, 5 or 6 of the three-watt LEDs in series:  

DROP1.2
DROP1.2x
DROP1.4
DROP1.4x in high power mode (4 LEDs)
HOG1x
HOG2
HOG3
HOG3x (needs two supplies)
HOG3xx (needs two supplies)
SURF2
SURF2x
SURF4 (needs two supplies)
SURF8 (needs two supplies for each light; total of four supplies)
SURF8x (needs two supplies for each light; total of four supplies)


These power supplies are just for replacement, and not for DIY:

RAIN2 
RAIN4 (needs two supplies)

GEM5 (one supply powers a set of four GEM5 lights)


TOP