LEDs for the any Santa Monica Filtration HOG model scrubber, or your own DIY.
Not for SURF, DROP, RAIN or SLIP models, and not for GEM lights.
The exact same three-watt LEDs that are used to make Santa Monica Hang On Glass scrubbers. This is for two (2) of these LED stars, 660nm spectrum (red), three watts each, and includes the extremely thin white heat-conductive adhesive tape which must be used to attach the LEDs. to a heatsink. Silver heat-conductive adhesive could also be used if you have some. If you use heat conductive grease, you will need to use screws or some other way to hold the LEDs in place.
500ma or 600ma current is a recommended minimum, but they can go as high as 700ma.
Warranty is for replacement of dead-on-arrival only.